Remover the battery cover;
Put 1* 9V Alkaline battery into the battery box;
Connect the wire and the device.
Take Off the small pin cover before you use. Put the rubber nose clip into nose, make sure 2 light point into the nose about 1 cm to 1.5 cm depth;
The Green light keep lighting shows working normal, if it is flashing, shows operation failure( Low battery, or the wire didn't put in a correct way)
The Green light will auto-turn off after one treatment session is over (5 minutes).
Use it 1 session a day.
How to clean:
1. Use a soft close to clean the light point, please don't immersed in water.
2. Disinfection: The light point can disinfected by 70 percentage of alcohol.
3. Protect: Please don't use the some device for different person.
- 660 nm Narrow band light waves
- Treatment session timer: 15 minute (±10%)
- Electricity: 4-8 mW for each pin.
- Energy for each time: 1-2.5J
Note:Powered by 9V Alkatine Battery (not include the battery)
- 1 * BioNase Cure Therapy Machine
- 1 * Sensor Cable
If you buy 4 pieces above, we will send 1 x User manual (we provide any kind of languages instructions, if you need, please make notice on your order, thank you)